Standing Seam Sheets Manufacturers in coimbatore

Standing Seam Profile - 1

Standing seam roofing is the most reliable roofing material. The risk of leakage is excluded due to concealed fixing, reliable seaming, and absence of through holes. Standing seam roofing blends into architectural character of cities thus being applied for new building construction as well as for remodeling and renovation.

Standing Seam Sheets

Product	Effective width	Crest Dept	Crest Distance
Standing seam	820mm	50mm	410 mm c/c With 2ribs at the centre for stiffening

Standing Seam Sheets Profile - 2

Product	Effective width	Crest Dept	Crest Distance
Standing seam	485mm	51mm	410 mm c/c With 1rib

Advantage

On site rollforming thus providing single length sheet from Ridge to eve avoiding make weather.
Tha channce of leakage is eliminated if roofing is properly seaned Easy and quick to install.
Absense of throu8gh holes Prevents perforation corrosion both at joints and on surface thus ensuring for very low ultimate durability.
Suitable for very low sloped Roofs.
Standing seam profile roofs are used for low slope by means of single long sheets with no joints.
This provides water tightness avoiding water leakage by usage of sealants and interlocking of the double lock type clips in the seams.
It simplifies the roofing installation and faster installation.
Preferred mostly architects and MNCs for their aesthetic beauty and very less maintenance.
Standing seam profile is site fabricated using the color coated coils by means of roll forming machine and the sheets laid from the ridge to the gutter.
No screws are used and hence long lasting.
Offers excellent design flexibility.
Mechanically seamed on the side laps.
Long length full length sheets eliminate end laps.
Can be produced and installed in lengths of up to 100m.
Onsite production of the roof of eliminates damage to the sheets.
Fire rated and light weighted.
Standing seam roof can be laid in single skin or using insulations.
Condensation free, durable and corrosion resistant.
FM approved (USA).
Very much preferred by EPC consultants and PMC companies.
Very much energy efficient and contributes to LEED and Pearl rating certification.
DBIT approved (Germany).

Technical Specification

MATERIAL	PREPAINTED GALVANISED STEEL(PPGI)	PREPAINTED GALVANISED STEEL(PPGL)	NON-COLOUR GALVALUME STEEL(BG)
Base metal	cold rolled steel	cold rolled steel	cold rolled steel
Yield strength	240MPA	340MPA	240Mpa
Metalic coating Specification.	Z120 g/m(gsm)	AZM 150 g/m(gsm)	AZM 150 g/m(gsm)
paint type on top coat	Regular Modified polyster(rmp)silicon modified polyster(SMP)poly viny di-flouride(PVDF2)	Regular Modified polyster(rmp)silicon modified polyster(SMP)poly viny di-flouride(PVDF2)	Non Colour
Product finish	Matt finish,Glossy finish	Matt finish,Glossy finish	natural
Masking	using polythene guard films	using polythene guard films	using polythene guard films
top coat thickness(dft)	18-20 microns minimum	18-20 microns minimum	-
Back coat	Epoxy/pu/polyester	Epoxy/pu/polyester	-
Back coat thickness(dft)	5-7 microns minimum	5-7 microns minimum	-
total coated thickness	0.5 and above	0.5 and above	0.5 and above
Top Coat color	Refer our color card	Refer our color card	-
Back coat color	Grey as per mail standard.	Grey as per mail standard.	-
Back coat color	Grey as per mail standard.	Grey as per mail standard.	-
Confirmed standrad	ASTM A653/A653M,ASTM A755/A755M,IS 277/IS 513,IS 14246,JIS.3312,As 1397	ASTM A792/A792/ASATM A755/A755M,JIS.3312,As 1397	ASTM A792/A792/,JIS.3312,As 1397