[email protected] 18005729242

EPS panels

EPS panels

Polystyrene Sandwich Panel also called EPS Sandwich Panel. The top & bottom Surface of this panel is Galvanized & pre-painted steel sheets, core material is polystyrene, it is formatted by laminating and pressing with 2 components PU glue. The sandwich panel is featured with temperature keeping, hot & sound insulation, anti water and fire resistant. It is widely used as the wall or roof for cold storage, industrial workshop, public building etc.

Alfa Panel System Comprise of Pre-Fabricated Composite sandwich panels with high density EPS Converted to Lamellar as core and profiled/ plain,colour coated galvanized steel / Galvalume Steel sheet facing on both sides, complete with joint sealants and fixing ancillaries.

PU/PIR Sandwich Puf Panels
EPS Roof Panels
PU/PIR Sandwich Puf Panels
EPS Wall Panels
  • Major savings in energy cost
  • Light weight and easy installation
  • High standard of thermal insulation
  • Can be produced rapidly and on demand in the required quantity and length
  • Can be easily transported to wherever they are needed
  • Lower cost solution compared to traditional building materials
  • Saves construction and maintenance cost
  • Provides durability and long life

Material - Galvalume Steel / Galvanized Steel / Aluminium

Thickness - 0.35mm to 0.70mm thick for Top skin and 0.35 to 0.50mm for Liner (Bottom Skin)

Colours - Bare Millfinish / off White/ Sky Blue / Royal Blue / Torres Blue / Mist Green / Cautfield Green / Brick Red / Shel Grey etc for Topskin and Pure White for Liner.

Panels System provides an one step solution in the form of insulated Walls and Roofing for easy and quicker construction of Various Roof and Wall of Factory Building, Hospitals,Storages,Exhibition Halls,Clean Rooms andFall Ceiling Purposes.

EPS Insulation Provides Light weight,Heat insulation,Water resistant with EPS of density 12-16 kg/m3

Colour coated Sheet requirement for Eps panel will be 0.45-0.6mm.

Panels are available in Various length (upto 8 mtrs) and Standard effective width of 980-1000 mm and thickness 50-100mm

The panels are finished with tongue & groove jointing arrangement

Panels For Both Wall & Roof Available

*Main Technical Parameters (support surface thickness is 0.5mm for both,EPS Density is 16Kg/m3)
OUR PRODUCTS Sandwich Puf Panel Division Pre Engineered Building Roofing Solution Decking-sheets Purlins Cold Room / Cold Room Doors Clean Room/Clean Room Doors Fire-Rated-Doors Light Gauge / Low Cost Building System
Send Us Enquiry